Solution Description
China Particular Truck 1500 Liters Drinking water Tank and 4000 Liters Suction Tank Vacuum Sewage Tank Truck
Description:
1. Chassis:
1) Drive kind: 4×2, 4×4, 6×4, 8×4 etc.
2) Our manufacturing facility has great enterprise partnership with XIHU (WEST LAKE) DIS.FENG, FOTON, ISUZU, FAW, SINOTRUCK, SHACMAN, JAC, JMC, etc.
2. Tanker entire body:From 2m3 to 25 m3 capacity.
three. Accessory of sewage suction factions: Equipped with PTO, transmission shaft, vacuum suction sewage pump, higher strain molding tank, moisture separator, fuel-oil separation, several directional manage valve, hanger rod, self-discharging valve, suck fecal gun and pipe community system.
| Vehicle Major Dimensions | Taxi kind | One |
| All round dimension(L*W*H)(mm) | 6300*2300*2850mm | |
| Wheelbase (mm) | 3300 | |
| Axle number | two | |
| Push variety | 4*2 | |
| Steering sort | LHD/RHD | |
| Max. Drive Speed (km/h) | 100 | |
| Curb fat (kg) | 5340 | |
| Chassis parameter | Chassis model | Xihu (West Lake) Dis.feng |
| Transmission | Handbook, 5 forward and 1 reverse | |
| Brakes | Air brake | |
| Tire | 6.00-fifteen | |
| Motor parameter | Motor Brand name | Chaochai |
| Gas kind | Diesel | |
| Horse Electrical power(hp) | 98hp | |
| Emission Regular | Euro III/IV/V | |
| Superstructure Parameter and primary overall performance | Cleaning Tank quantity(m3) | one |
| Cleaning Tank materials | four mm good good quality carbon metal spherical form | |
| Sewage tank quantity(m3) | 4 | |
| Sewage tank substance | six mm very good high quality carbon metal | |
| Pump | Imported Italy high good quality vacuum pump or chinese vacuum pump | |
| Common configuration | 60m lengthy higher pressure pipe, 10 high force sprayers,examine window, 1 gravity mouth, cleaning apparatus,8m prolonged suction pipe, and so forth | |
| Major overall performance | Suction time ≤ 5min powerful suction range ≥ 9m |
|
| Primary function | Cleaning town sewer, pipeline dredge, suction sewage,and many others | |
| Optional | watering |
Merchandise Catalog:
one. LPG Tank Truck Trailer/ Fuel Tanker Truck/ LPG station
2. Water truck / Water Tank Truck / Water Sprinkler Truck/Water Tanker
3. Truck with crane / Truck mounted crane
4. Dump Truck / Tipper Truck/Side Tipper/Conclude Tipper
five. Fire Battling Truck / Fire Truck / Fire Car
six. Concrete Mixer Truck
seven. Van truck /Refrigerated truck
eight. Fecal suction truck / Sewage suction truck,
9. Cement Powder Tank truck/ Bulk cement truck
ten. High-altitude operation truck,
eleven. Self-loading rubbish truck, garbage compactor truck, sealed garbage truc
twelve. Tractor
13. High Force Cleaning Truck
14. Sweeper Truck
fifteen. Semi Trailer ( flat bed trailer / skeleton trailer / dump semi trailer / side wall trailer / low mattress trailer / van container trailer / warehouse trailer, and so forth. )
|
US $13,500-26,398 / Piece | |
1 Piece (Min. Order) |
###
| Certification: | ISO9000, CCC, TS16949, CE |
|---|---|
| Emission Standard: | Euro3, Euro4, Euro5 |
| Payload: | 2t-5t |
| Transmission Type: | Manual |
| Fuel: | Diesel |
| Tank Volume: | 3000L-8000L |
###
| Customization: |
Available
|
|---|
###
| Vehicle Main Dimensions | Cab type | Single |
| Overall dimension(L*W*H)(mm) | 6300*2300*2850mm | |
| Wheelbase (mm) | 3300 | |
| Axle number | 2 | |
| Drive type | 4*2 | |
| Steering type | LHD/RHD | |
| Max. Drive Speed (km/h) | 100 | |
| Curb weight (kg) | 5340 | |
| Chassis parameter | Chassis brand | Dongfeng |
| Transmission | Manual, 5 forward and 1 reverse | |
| Brakes | Air brake | |
| Tire | 6.00-15 | |
| Engine parameter | Engine Brand | Chaochai |
| Fuel type | Diesel | |
| Horse Power(hp) | 98hp | |
| Emission Standard | Euro III/IV/V | |
| Superstructure Parameter and main performance | Cleaning Tank volume(m3) | 1 |
| Cleaning Tank material | 4 mm good quality carbon steel; round shape | |
| Sewage tank volume(m3) | 4 | |
| Sewage tank material | 6 mm good quality carbon steel | |
| Pump | Imported Italy high quality vacuum pump or chinese vacuum pump | |
| Standard configuration | 60m long high pressure pipe, 10 high pressure sprayers,inspect window, one gravity mouth, cleaning apparatus,8m long suction pipe, etc | |
| Main performance | Suction time ≤ 5min effective suction range ≥ 9m |
|
| Main function | Cleaning city sewer, pipeline dredge, suction sewage,etc | |
| Optional | watering |
|
US $13,500-26,398 / Piece | |
1 Piece (Min. Order) |
###
| Certification: | ISO9000, CCC, TS16949, CE |
|---|---|
| Emission Standard: | Euro3, Euro4, Euro5 |
| Payload: | 2t-5t |
| Transmission Type: | Manual |
| Fuel: | Diesel |
| Tank Volume: | 3000L-8000L |
###
| Customization: |
Available
|
|---|
###
| Vehicle Main Dimensions | Cab type | Single |
| Overall dimension(L*W*H)(mm) | 6300*2300*2850mm | |
| Wheelbase (mm) | 3300 | |
| Axle number | 2 | |
| Drive type | 4*2 | |
| Steering type | LHD/RHD | |
| Max. Drive Speed (km/h) | 100 | |
| Curb weight (kg) | 5340 | |
| Chassis parameter | Chassis brand | Dongfeng |
| Transmission | Manual, 5 forward and 1 reverse | |
| Brakes | Air brake | |
| Tire | 6.00-15 | |
| Engine parameter | Engine Brand | Chaochai |
| Fuel type | Diesel | |
| Horse Power(hp) | 98hp | |
| Emission Standard | Euro III/IV/V | |
| Superstructure Parameter and main performance | Cleaning Tank volume(m3) | 1 |
| Cleaning Tank material | 4 mm good quality carbon steel; round shape | |
| Sewage tank volume(m3) | 4 | |
| Sewage tank material | 6 mm good quality carbon steel | |
| Pump | Imported Italy high quality vacuum pump or chinese vacuum pump | |
| Standard configuration | 60m long high pressure pipe, 10 high pressure sprayers,inspect window, one gravity mouth, cleaning apparatus,8m long suction pipe, etc | |
| Main performance | Suction time ≤ 5min effective suction range ≥ 9m |
|
| Main function | Cleaning city sewer, pipeline dredge, suction sewage,etc | |
| Optional | watering |
The Different Parts of a PTO Shaft
Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.
Tractor’s power take-off (PTO) shaft
A Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.
Types
PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.
Rotation direction
The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.
Safety chain
One of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.
Shield
A PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
editor by czh 2023-01-08
