제품 설명
Good Quality drive shaft yoke for Agricultural Tractor Parts
1. 튜브 또는 파이프
저희는 이미 모든 시리즈에 대해 삼각형 단면 튜브와 레몬 단면 튜브를 보유하고 있습니다.
저희는 고객께서 특정 시리즈에 필요로 하시는 별 모양 튜브, 스플라인 튜브 및 기타 프로파일 튜브를 보유하고 있습니다. (저희 카탈로그에 모든 생산 품목이 포함되어 있는 것은 아니니 참고해 주시기 바랍니다.)
삼각형이나 레몬 모양 이외의 튜브를 원하시면 도면이나 사진을 제공해 주세요.
2. 엔드 요크
저희는 여러 종류의 퀵 릴리스 요크와 일반 보어 요크를 보유하고 있습니다. 참고하실 수 있도록 가장 일반적인 유형을 알려드리겠습니다.
카탈로그에서 원하시는 상품을 찾을 수 없는 경우, 도면이나 사진을 보내주셔도 됩니다.
3. 안전 장치 또는 클러치
참고하실 수 있도록 안전 장치 세부 정보를 첨부하겠습니다. 저희는 이미 프리휠(RA), 래칫 토크 제한기(SA), 전단 볼트 토크 제한기(SB), 3가지 유형의 마찰 토크 제한기(FF, FFS, FCS) 및 오버러닝 커플러(어댑터)(FAS)를 보유하고 있습니다.
4. 플라스틱 보호대, 연결 방식, 도색 색상, 포장 등과 관련하여 특별한 요구 사항이 있으시면 언제든지 알려주십시오.
특징:
1. 당사는 수년간 드라이브 샤프트, 스티어링 커플러 샤프트, 유니버설 조인트의 설계 및 제조를 전문으로 해왔으며, 미국, 유럽, 호주 등지로 제품을 수출해 왔습니다.
2. 모든 종류의 일반적인 기계적 상황에 적용 가능
3. 당사 제품은 높은 강도와 강성을 자랑합니다.
4. 내열성 및 내산성
5. OEM 주문을 환영합니다.
저희 공장은 PTO 샤프트 요크 및 유니버설 조인트 분야의 선도적인 제조업체입니다.
당사는 다양한 차량, 건설 기계 및 장비에 사용되는 고품질 PTO 요크를 제조합니다. 모든 제품은 회전식 라이터로 제작됩니다.
We are currently exporting our products throughout the world, especially to North America, South America, Europe, and Russia. If you are interested in any item, please do not hesitate to contact us. We are looking CZPT to becoming your suppliers in the near future.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated|
|
|---|
| 유형: | 포크 |
|---|---|
| 용법: | 농산물 가공, 농지 기반 시설, 경작, 수확, 파종 및 시비, 곡물 탈곡, 세척 및 건조 |
| 재료: | 탄소강 |
| 맞춤 설정: |
사용 가능
| 맞춤형 요청 |
|---|
PTO Shafts and PTO Shaft Shields
When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.
540 rpm
A 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.
Safety chains
Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.
Shield
The PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.
Reverse rotation
The PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
editor by CX 2023-05-16
